Campbell Scientific CR3000 Micrologger - Manual (Page 107)

Section 7. Installation
107
• Files Manager Setting specifies the number of files with the specified
extension that will be saved when received from a specified node.
Figure 43: DevConfig Deployment | Advanced tab
7.6.3.1.2 Logger Control Tab
• Clocks in the PC and CR3000 are checked every second and the difference
displayed. The System Clock Setting allows entering what offset, if any, to
use with respect to standard time (Local Daylight Time or UTC, Greenwich
mean time). The value selected for this control is remembered between
sessions. Clicking the Set Clock button will synchronize the station clock to
the current computer system time.
• Current Program displays the current program known to be running in the
datalogger. This value is empty if there is no current program.
• The Last Compiled field displays the time when the currently running
program was last compiled by the datalogger. As with the Current Program
field, this value is read from the datalogger if it is available.
• Last Compile Results shows the compile results string as reported by the
datalogger.
• The Send Program button presents an open-file dialog box from which to
select a program file to be sent to the datalogger. The field above the button is
updated as the send operation progresses. When the program has been sent
the Current Program, Last Compiled, and Last Compile Results fields are
filled in.