beautypg.com

8 instructions, 1 measurement and data-storage processing – Campbell Scientific CR3000 Micrologger User Manual

Page 144

background image

Section 7. Installation

144 

 

 

Figure 49: Sequential-mode scan priority flow diagrams

7.7.3.8 Instructions

In addition to BASIC syntax, additional instructions are included in CRBasic to
facilitate measurements and store data. CRBasic Programming Instructions

(p. 475)

contains a comprehensive list of these instructions.

7.7.3.8.1 Measurement and Data-Storage Processing

CRBasic instructions have been created for making measurements and storing
data. Measurement instructions set up CR3000 hardware to make measurements
and store results in variables. Data-storage instructions process measurements into
averages, maxima, minima, standard deviation, FFT, etc.

Each instruction is a keyword followed by a series of informational parameters
needed to complete the procedure. For example, the instruction for measuring
CR3000 panel temperature is:

PanelTemp(Dest,Integ