HP Insight Control Software for Linux - Manual (Page 27)

3. Select either Discover a group of systems or Discover a single system button, as
appropriate.
There is a slight difference in the window for these two choices. The Discover a group of
systems
choice is shown in the illustration.
4. Enter a descriptive name in the Name text field.
The descriptive name must be either listed in the CMS's hosts file or known to the CMS's
name server. Otherwise, enter an IP address.
5. Ensure that the Schedule check box is not checked.
6. If you chose Discover a group of systems, enter the names or IP addresses of the
management processors you want to discover in the Ping inclusion ranges, system (hosts)
names, and/or hosts files
field.
If you chose Discover a single system, enter the name or IP address of the management
processor you want to discover in the Enter the system's name or IP address: field.
7. Select Save to save your discovery task.
8. Select Run Now to begin the discovery of the management processors.
On successful completion, the management processors appear under All Systems and All
Management Processors
on the left-hand side of the window.
At this time, use the Network Configuration Editor to define the network parameters for the
server associated with the management processor.
2.2 Preparing for virtual media 27