1 ensuring that nagios is reporting status, 2 summarizing service status – HP Insight Control Software for Linux User Manual
Page 58
charon: 11:02am up 0:49, 1 user, load average: 0.38, 0.36, 0.36
poseidon: 9:46am up 1 day 4:46, 3 users, load average: 1.10, 1.23, 1.34
4.
Verify that the nrpe daemon is working on all the managed systems with the following
command:
# /opt/hptc/nagios/libexec/gather_all_data --verbose
write 4048, 2, 2, eth1 to db => icelx2 (charon.example.com)
write 4048, 2, 2, eth1 to db => icelx4 (pluto.example.com)
write 4048, 2, 2, eth1 to db => icelx1 (poseidon.example.com)
5.
Ensure that the vars.ini file is synchronized across all the managed systems
# /opt/hptc/nagios/libexec/check_nagios_vars --update
Vars OK on nodes icelx[1-2,4]
5.5.1 Ensuring that Nagios is reporting status
Start Nagios to ensure that it is reporting system status:
1.
Select the following menu item from the HP Insight Control user interface:
Tools
→Integrated Consoles→Nagios
2.
When prompted, log in as the same user you specified when you logged into HP SIM and
enter the associated password.
3.
Do one of the following:
•
If the collection contains fewer than 100 managed systems, use the Service Detail
view to obtain an overview of system status. It lists the Nagios hosts and shows their
status.
•
If the collection contains more than 100 managed systems, use the Service Problems
view to obtain a more practical overview.
If you need more information about how to use Nagios, see
.
5.5.2 Summarizing service status
The nrg command uses data collected by Nagios. On the CMS, run the nrg --mode summary
command from the command line to display a summary of defined Nagios services and the state
of those services. For example:
# nrg --mode summary
Apache HTTPS Server 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
configuration 3-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Configuration Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Enclosure Status 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Enclosures Collection Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Environment 3-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Host Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
IP Assignment - DHCP 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Load Average 2-Ok 1-Warn 0-Crit 0-Pend 0-Unk
Management Settings Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Nagios Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
NodeInfo 2-Ok 1-Warn 0-Crit 0-Pend 0-Unk
Sensor Collection Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Supermon Metrics Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Switch Data Collection 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Syslog Alert Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
Syslog Alerts 4-Ok 0-Warn 0-Crit 0-Pend 0-Unk
System Event Log 3-Ok 0-Warn 0-Crit 0-Pend 0-Unk
System Event Log Monitor 1-Ok 0-Warn 0-Crit 0-Pend 0-Unk
System Free Space 2-Ok 1-Warn 0-Crit 0-Pend 0-Unk
Totals: 32-Ok 3-Warn 0-Crit 0-Pend 0-Unk
58
Configuring monitoring services