HP Insight Control Software for Linux - Manual (Page 117)

Figure 10-1 Network groups example
The concept behind a Scalable Deployment is to transfer an OS image tar file from the CMS to
the group leader in each network group. After the image tar file is completely transferred, the
group leader transfers the image to each of the remaining servers in the network group. The
advantage to this concept is that all network traffic is kept local to the switch or enclosure. All
the network groups operate in parallel without network traffic from one group affecting any
other group.
The procedure to associate a set of managed systems in a discovered enclosure with a network
group differs from the procedure to associate a set of managed systems connected to a particular
switch with a network group:
For Enclosures
When an enclosure is discovered, its managed systems are added to the All Enclosures
collection. For information on discovering an enclosure, see
Section 3.3 (page 41)
Run the netgroup command as follows to generate the netgroups.conf file for a discovered
enclosure:
Generate the netgroups.conf file with the following command:
# /opt/hptc/bin/netgroup --ofile /opt/mx/icle/netgroups.conf
10.4 Preparing for scalable deployment 117