HP Insight Control Software for Linux - Manual (Page 188)

date_and_time |icelx1 |0 |1854680 |1 |2308294 |564006498 |223267 |2258 |48882
| |1 |3645524 |295 |2669669 |530638968 |31391474 |1 |97907
| |2 |3118507 |60 |2828907 |550132258 |12305645 |21605 |36849
| |3 |2585423 |1 |2680954 |561896064 |1266708 |13143 |1529
| |4 |2700043 |215 |2259501 |563186698 |295084 |0 |2273
| |5 |3517129 |107 |2372128 |561278491 |1274550 |0 |1402
| |6 |3684936 |300 |2303954 |561833592 |619651 |0 |1368
| |7 |3705238 |221 |2321097 |562124531 |291321 |0 |1387
The shownode metrics cputotals command also displays the nice value and the user,
system, and idle times (in milliseconds), and for the managed system as a whole. For example:
# shownode metrics cputotals
Timestamp |Node |User |Nice |System |Idle |I/O |IRQ |Soft IRQ
---------------------------------------------------------------------------------------------------
date_and_time |icelx3 |3289215 |262 |15314147 |2147483647 |10839721 |32328 |12001
date_and_time |icelx5 |115312 |187 |654869 |2147483647 |584261 |3905 |5582
date_and_time |icelx2 |12447298 |29007 |19381006 |2147483647 |6682148 |51692 |65057
date_and_time |icelx4 |13337073 |175 |11821391 |699735521 |8913754 |46640 |52458
date_and_time |icelx6 |38339 |77 |81481 |133916091 |19221 |6910 |2660
date_and_time |icelx1 |24823722 |1204 |67675999 |2147483647 |47692422 |37030 |191700
The shownode metrics load command displays 1-, 5-, and 15-minute processor load averages.
For example:
# shownode metrics load
Timestamp |Node |1 min |5 min |15 min |# Running |# threads
---------------------------------------------------------------------------------
date_and_time |icelx3 |0.14 |0.05 |0.01 |1 |146
date_and_time |icelx5 |0.00 |0.00 |0.00 |1 |90
date_and_time |icelx2 |0.01 |0.05 |0.00 |1 |191
date_and_time |icelx4 |0.36 |0.21 |0.18 |1 |503
date_and_time |icelx6 |0.00 |0.00 |0.00 |1 |121
date_and_time |icelx1 |0.38 |0.30 |0.23 |1 |227
16.2.4.3 Displaying memory
The shownode metrics mem command displays memory total and usage information. For
example:
# shownode metrics mem
Timestamp |Node |Total |Free |Buffer |Shared |TotalHigh |TotalFree |Cached
---------------------------------------------------------------------------------------------
date_and_time |icelx3 |4039616 |240360 |135832 |0 |0 |0 |2744104
date_and_time |icelx5 |4148548 |3502700 |157864 |0 |3275096 |2819496 |407160
date_and_time |icelx2 |4048376 |2775708 |57020 |0 |0 |0 |375768
date_and_time |icelx4 |4039616 |231936 |103828 |0 |0 |0 |2264952
date_and_time |icelx6 |2054832 |1317672 |62868 |0 |0 |0 |515880
date_and_time |icelx1 |8188360 |55512 |37764 |0 |0 |0 |23312
16.2.4.4 Displaying paging and swap data
The shownode metrics paging command displays paging data. For example:
# shownode metrics paging
Timestamp |Node |pgpgin |pgpgout |pswpin |pswpout
---------------------------------------------------------------------------
date_and_time |icelx3 |2834389 |357788892 |0 |0
date_and_time |icelx5 |241014 |11340197 |0 |0
date_and_time |icelx2 |359162 |243216048 |0 |0
date_and_time |icelx4 |1634975 |209216658 |0 |0
date_and_time |icelx6 |537706 |6338078 |0 |0
date_and_time |icelx1 |1815361 |636598562 |2372 |509247
The shownode metrics swap command displays swap space total and usage for the node
on which the command is issued. For example:
# shownode metrics swap
Timestamp |Node |Total |Used |Free |Page Cache
---------------------------------------------------------------------------
date_and_time |icelx3 |2031608 |0 |2031608 |0
date_and_time |icelx5 |2031608 |0 |2031608 |0
date_and_time |icelx2 |6291336 |0 |6291336 |0
date_and_time |icelx4 |2031608 |0 |2031608 |0
date_and_time |icelx6 |2031608 |0 |2031608 |0
date_and_time |icelx1 |2031608 |2031608 |0 |0
188 Using the command line to view managed system status