HP Radio Frequency Planner Software Series - Manual (Page 92)

Table of Contents
HP RF Planner User Guide
85
7.3.10 Color Palette
This section shows the color palette used in the planning of Device Placement views. Double-click the Color Index to open the
Color dialog box where you can customize the colors.
Figure 109. Status and Control Pane: Color Palette
7.4 Status Bar
The Status Bar appears at the extreme bottom of the screen. The Status Bar is divided into five sections.
• Cursor Location
• RSSI Display
• Layout Dimensions
• Current Mode
• Interference
• SINR
7.4.1 Cursor Location (X, Y)
Cursor Location displays the location coordinates with respect to the top left corner of the layout.
Figure 110. Status and Control Pane: Cursor Location
7.4.2 RSSI Display
Planner predicts the signal strength at the point where the cursor points.
Figure 111. Status and Control Pane: RSSI Display
7.4.3 Layout Dimensions
The status bar displays the dimensions of the layout.
Figure 112. Status and Control Pane: Layout Dimensions
7.4.4 Current Mode
The status bar displays the name of the icon on which the cursor points.
Figure 113. Status and Control Pane: Current Mode
7.4.5 Interference
The status bar displays the channels that experience high interference.
Figure 114. Status and Control Pane: Interference
7.4.6 SINR
The status bar displays the SINR level at a particular location on the layout.
Figure 115. Status and Control Pane: SINR