HP Radio Frequency Planner Software Series - Manual (Page 105)

Table of Contents
HP RF Planner User Guide
98
• Create System Defined Calibration Points: Select the checkbox to create system defined calibration points. This
enables you to specify the pairs of points for calibration. Planner creates these points around a material when you are
in the Calibration View. These points are represented by the icon.
• Specify Number of Pairs: Specify the number of pairs of calibration points. The default value is 4 pairs.
8.3 Settings: AP Defaults
You can invoke the Settings dialog box in two ways:
• Go to ToolsSettingsAP Defaults.
• Right-click the AP in the AP tree in the Device Library window and select Properties.
The Default AP Properties dialog box appears.
Figure 133. Settings – AP Defaults
Define settings for the following AP parameters.
• AP Prefix: Specify the text to prefix to an AP when APs are numbered.
• Model: Select an AP model from the drop-down list of commercially available AP models. Planner enables, disables,
or changes the other properties in this dialog box based on the selected AP model.
• Select Radio: Select the radio from the drop-down list.
• Radio Properties

SSID: Enter the SSID of the AP’s radio.