HP Radio Frequency Planner Software Series - Manual (Page 47)

Table of Contents
HP RF Planner User Guide
40
Delete Sensor
Click <Delete> and confirm the deletion of a Sensor.
5.5.3 Antenna Repository
Antenna Repository contains a list of predefined antennae. You can add a new antenna, delete an antenna, or define new
radiation patterns for an antenna.
Select Antenna Repository from the Tools menu.
Figure 47. Tools Menu – Antenna Repository
The Antenna Repository dialog box displays a list of available antennae, their manufacturer, model, radiation pattern and
gain.
You can do the following:
• Add an antenna
• Modify an antenna
• Delete an antenna
Add Antenna
Click <Add> to add an antenna and specify the antenna properties.
Figure 48. Antenna Repository – Adding an Antenna
Add Antenna Properties Description
Manufacturer Enter the name of the manufacturer.
Model No. Enter the antenna model.
Radiation Pattern Select the radiation pattern from the drop-down list.
Add New
Click to add a new radiation pattern. For details, please refer to the Radiation
Pattern Repository section.
Gain Enter the Gain (1 to 99 dBi).
Modify Antenna
Click <Modify> on the Antenna Repository dialog box to modify an existing antenna. The Modify Antenna dialog box