HP Radio Frequency Planner Software Series - Manual (Page 52)

Table of Contents
HP RF Planner User Guide
45
Deleting an Application Environment
Click <Delete> and confirm the deletion of the application environment.
5.5.6 Waterfall Curve Repository
Planner provides a list of waterfall curves. You can use them to design the layout. You can also create custom defined
waterfall curves.
Select Waterfall Curve Repository from the Tools menu.
Figure 56. Tools Menu – Waterfall Curve Repository
The Waterfall Curve Repository dialog box displays a list of Waterfall Curves.
You can do the following:
• In case of a Default Waterfall Curve:

Add a Waterfall Curve
 View a Waterfall Curve
Note: The Modify and Delete options are disabled for Default Waterfall Curve.
• In case of a system or user-defined waterfall curve:

Add a Waterfall Curve
 Modify a Waterfall Curve
 Delete a Waterfall Curve
Adding a Waterfall Curve
Click <Add> to add a waterfall curve and specify the waterfall curve settings. The Add Waterfall Curve dialog box appears.
The dialog box provides a list of the link speed of an AP mapped to the signal strength in the ascending order.The Add
Waterfall Curve dialog box for 802.11a, 802.11b, and 802.11g protocols is different from the 802.11a/n and 802.11b/g/n
protocols.