HP XP P9000 Performance Advisor Software User Manual

Page 328

Select or enter the following details:

• Name of the report in the Report Name box. The name should not be less than 2 characters

or exceed 80 characters in length.

• Name of the customer or company in the Customer Name box.
• Name of the consultant in the Consultant box.
• Location for the array in the Array Location box.
• The array type from the Array Type list.

The Array Type list displays the supported XP disk array models (XP24000, XP20000,
XP12000, XP10000, and the XP1024/128), and the P9000 disk arrays models (P9500).

• The array DKC (serial number) from the Array list.

Based on the array model that you select, the Array list displays the corresponding XP or the
P9000 disk array DKCs that are monitored by P9000 Performance Advisor.

• The type of report that you want on the selected XP or P9000 disk array, from the Report

Type list.
• Array Performance
• LDEV IO
• LDEV Activity
• RAID Group Utilization
• Cache Utilization
• ACP Utilization
• CHIP Utilization
• Journal Pool Utilization
• THP Pool Occupancy
• Snapshot Pool Occupancy
• MP Blade Utilization report
• All report

IMPORTANT:

• The ACP Utilization report and the CHIP Utilization report can be generated only for the

XP disk arrays

• The MP Blade Utilization report can be generated only for the P9000 disk arrays

You can also select multiple reports and view the corresponding data in a single report doc-
ument. The data for each report is arranged based on the order in which you selected them
while creating or scheduling a report. Use the Shift or the Ctrl key for selecting multiple reports.
Alternatively, use the Up and the Down arrow keys with the Shift and the Ctrl keys.

NOTE:

• The LDEV Activity report output is always in a .csv format. So, you cannot select the

LDEV Activity report along with the other reports, as their output will be in .html, .pdf,
docx