HP XP P9000 Performance Advisor Software - Manual (Page 325)

For P9000 disk arrays For XP disk arrays Description Report types
Yes No
The MP Blade Utilization report
provides data on the average
utilization of each installed MP
blade. In addition, the following
are also included in the report
for each MP blade:
• The top 20 consumers
(LDEVs, continuous access
journal groups, or E-LUNs)
and their average utilization
of the CPU cycles.
• The average MP blade utiliz-
ation by each processing
type.
So, if there are four MP blades,
the MP Blade Utilization report
displays the utilization data and
related charts in the following
order:
1. Average utilization data for
the first MP blade.
2. Average utilization by top
20 consumers for the first
MP blade.
3. Average utilization by the
processing types for the
first MP blade.
The above-mentioned sequence
is repeated for the subsequent
MP blades.
MP Blade Utilization
Yes
NOTE:
The ACP/DKA and the
CHIP/CHA utilization data
are not applicable for the
P9000 disk arrays. So, their
reports are not included in the
All report generated for the
P9000 disk arrays.
Yes
NOTE:
The MP blade utilization data
is not applicable for the XP
disk arrays. So, the MP Blade
Utilization report is not
included in the All report
generated for the XP disk
arrays.
The All report consolidates and
provides the above-mentioned
reports in a single report for the
selected date and time range:
IMPORTANT:
The LDEV Activity report is
not included in the All report.
All
To view sample reports for the above-mentioned report types, see “ Appendix B - Sample
reports ” on page 401.
HP StorageWorks P9000 Performance Advisor Software User Guide 325