HP XP P9000 Performance Advisor Software - Manual (Page 223)

Figure 18 Continuous Access Async
.
Table 13 describes the data displayed:
Table 13 Continuous access configuration data
Description Screen element
Serial number of the primary XP or P9000 disk array
(primary data center).
Primary Array
LDEV configured as P-VOL on the primary data center.
Displays the LDEV number in cu:ldev format.
PVOL
Serial number of the secondary XP or P9000 disk
array.
Secondary Array
LDEV configured as S-VOL on the secondary data
center. Displays the LDEV number in cu:ldev format.
SVOL
Current replication link status of the P-VOL or S-VOL
on the selected XP or P9000 disk array. The replication
link status shown is corresponding to the continuous
access transactions happening on the selected XP or
P9000 disk array, and can be one of the following:
• SMPL
• COPY
• PAIRED
• Pair Suspend
• Pair Suspend Error
• Pair DUB
• Reverse Copy
• Pair SideFile 30% over
• Pair SideFile over Suspend
• SVOL Swap ready Suspend
• Unknown
Pair Status
Type of volume (PVOL or SVOL) configured on the
primary data center.
Volume Type
Thick or Thin, indicates virtual volume or physical
LDEV.
Provision Type
HP StorageWorks P9000 Performance Advisor Software User Guide 223