HP 8.20q Fibre Channel Switch - Manual (Page 86)

86 Managing Logical Disks
5. (Optional) To manually give an HBA access to the logical drive, complete the following steps:
a. On the New Logical Disk Server Presentation dialog box (
Figure 53 ), click Manual Add.
The New HBA Port Names dialog box opens ( Figure 54 ).
Figure 54 New HBA Port Names dialog box
b. In the first box, enter the WWPN of the HBA. You can enter the HBA WWPN formatted as either
20 consecutive alphanumeric characters, or as 10 two-digit segments separated by hyphens; for
example, xx-xx-xx-xx-xx-xx-xx-xx-xx-xx.
c. In the second box, enter the name of the server on which the HBA(s) are installed. If you do not
know the name of the server, enter Unknown.
d. When you finish manually adding the HBA, click OK to save the information and close the dialog
box. To close the dialog box without saving any data, click Cancel.
6. When you finish on the New Logical Disk Server Presentation dialog box, click OK to save your
changes and close the dialog box.
The Create New Logical Disk wizard (
Figure 55 ) opens and lists the information for the new logical
disk.
Figure 55 Create New Logical Disk Wizard (EVA storage)