HP 8.20q Fibre Channel Switch - Manual (Page 101)

HP SAN Connection Manager User Guide 101
8 Managing Servers
This chapter provides procedures for viewing and managing your servers using SAN Connection
Manager.
Viewing server information
SAN Connection Manager provides easy access to information about each server within your SAN, as
well as details about the drives, logical disks, and volumes on the servers.
To view information about a server:
• In the navigation pane under Server-Storage View, click the server you want to view.
The content pane (
Figure 69 ) shows information for the selected server.
Figure 69 Server Information
This pane includes the following read-only information:
• Server Information header:
• OS Type
• IP Address
• Number of HBAs
• Server HBA Ports tab:
• Model
• Node Name
• Serial Number
• Firmware Version
• BIOS Version
• Driver Version
• HBA Status
• Number of Connected Targets
• Server Accessible Logical Disk tab:
• Device Type
• Vendor ID
• Product ID
• Product Revision
• Serial Number
• Bus Type
• Rebuild Priority
• LUNs Active Controller(s)
• LUN Flags