HP 8.20q Fibre Channel Switch - Manual (Page 151)

HP SAN Connection Manager User Guide 151
path A path to a device is a combination of a HBA port instance and a target port as distinct from
internal paths in the fabric network. A fabric network appears to the operating system as an
opaque network between the HBA (initiator) and the target.
Since a path is a combination of an HBA and a target port, it is distinct from another path if it
is accessed through a different HBA and/or it is accessing a different target port.
Consequently, when switching from one path to another, the driver might be selecting a
different HBA (initiator), a different target port, or both.
This is important to the driver when selecting the proper method of failover notification. It can
make a difference to the target device, which might have to take different actions when
receiving retries of the request from another initiator or on a different port.
PCI Express (PCIe) A third-generation input/output (I/O) standard that allows enhanced Ethernet network
performance beyond that of the older Peripheral Component Interconnect (PCI) and PCI
Extended (PCI-X) desktop and server slots. The higher performance of PCI Express derives from
its faster, serial-bus architecture, which provides a dedicated, bi-directional I/O with 2.5-GHz
clocking, beneficial to Ethernet network connectivity for desktops, workstations, and servers.
port Access points in a device where a link attaches. The four types of ports include the following:
• N_Port (Node Port)—an FC port that supports point-to-point topology.
• NL_Port (Node Loop Port)—an FC port that supports loop topology.
• F_Port (Fabric Port)—a port in a fabric where an N_Port can attach.
• FL_Port (Fabric Loop Port)—a port in a fabric where an NL_Port can attach.
port instance The number of a port in the system. Each HBA may have one or multiple ports, identified with
regard to the HBA as port 0, port 1 and so forth. to avoid confusion when dealing with a
system containing numerous ports, each port is assigned a port instance number when the
system boots up. So Port 0 on an HBA might have a port instance number of, for example, 8 if
it is the eighth port discovered by the system.
RHEL Red Hat Enterprise Linux
SAD Security association database
SAN Storage area network, multiple storage units (disk drives) and servers connected by networking
topology.
SAS Serial attached SCSI; a data transfer technology designed to move data to and from computer
storage devices such as hard drives and tape drives.
SATA Serial advanced technology attachment; the new standard for connecting hard drives with
serial signaling technology.
SLES SUSE Linux Enterprise Server
SCM SAN Connection Manager
SMU Storage Management Utility
SNMP Simple Network Management Protocol
SPD Security policy database
SPI Security parameter index, an identification tag added to the header while using IPsec for
tunneling IP traffic. This tag helps the kernel discern between two traffic streams where different
encryption rules and algorithms may be in use.
SSSU HP Storage System Scripting Utility software (SSSU), a powerful scripting utility. The SSSU
provides a host to array communications bridge for documenting and automating EVA local
and remote configuration tasks.