HP 8.20q Fibre Channel Switch - Manual (Page 14)

14 Installing, Upgrading, and Removing HP SAN Connection Manager
7. Click OK to close the SAN diagnostic window and continue the installation, or click Cancel to stop the
installation.
If the SAN Connection Manager software component is installed on a system with EVA storage, the
Add EVA Management Account dialog box ( Figure 3 ) prompts you to either select an existing user
account or to create a user account to manage your EVA.
Figure 3 Installation wizard: Add EVA Management Account
8. Before installation can proceed, you must add a user account to the HP Storage Admin user group.
(This step is not necessary for MSA storage.) Choose one of the following options:
• If you do not already have any user accounts set up, create a user account now by completing the
User name, Password, and Confirm Password boxes. Then click Create User and Add to Group.
• If you already have one or more user accounts set up (for example, you may have set up accounts
when you installed your EVA), select one to add to the HP Storage Admin group. Then click Add To
Group.
When prompted, enter a password for the existing user account, and then click OK.
The selected user is added to the HP Storage Admin group and the Add EVA Management Account
dialog box closes.
9. The Enable VCEM Discovery dialog box ( Figure 4 ) enables you to view your blade enclosures in the
topology if you have a configured VCEM server. Choose one of the following options:
• Select the Enable VCEM Discovery check box, enter the VCEM server username, password, IP
address, and then click Set.
• Click Skip to leave VCEM discovery disabled and continue.
The message “Your installation is complete” appears. Or, if any software components fail to install, the
final installation window lists those components.
10. Click the View Error Log link to open an error log that provides additional information. You may be
prompted to upgrade, add, or modify components for successful installation.
11. Remove the SAN Connection Manager CD, and then click Reboot.
12. Restart your computer to complete the installation process.