HP 8.20q Fibre Channel Switch - Manual (Page 81)

HP SAN Connection Manager User Guide 81
To manually enter the HBA server name and OS type:
1. To enter FDMI information, respond Yes/OK to the prompt to manually enter the HBA’s host name and
OS type.
The Enter HBA Server Name and OS Type dialog box (
Figure 49 ) lists all the HBAs with either a
missing Server Name, Server OS, or both.
Figure 49 Enter HBA Server Name and OS Type dialog box
NOTE: You can also access the Enter HBA Server Name and OS Type dialog box by opening the
Advanced Operations menu, and then clicking Edit Manual FDMI List.
2. From the list of HBAs with missing FDMI information, select the check box next to one or more HBAs. To
select all HBAs, select the Select All check box.
When at least one HBA is selected, the Enter HBA Info button is enabled.
3. Click Enter HBA Info.
The HBA Server Name and OS Type dialog box (
Figure 50 ) opens.
Figure 50 HBA Server Name and OS Type dialog box
4. In the HBA Server Name box, type a server name for the HBA.
5. Select the operating system type for the server from the Server OS Type list, or type in the OS name.
6. To save this data for the HBA and close this dialog box, click OK. To close this dialog box without
saving the HBA data, click Cancel.
The Enter HBA Server Name and OS Type dialog box in
Figure 49 shows the server name and OS type
that you entered in the dialog box shown in Figure 50 .
7. Click Close to save this information and exit the dialog box.