HP 8.20q Fibre Channel Switch - Manual (Page 50)

50 Managing Switches
Viewing switch zoning information
The Switch Zoning Information dialog box provides facts about the current switch zoning setup. This
information is read-only; you cannot make changes on this dialog box. To change switch zoning, see
“Setting the switch default zoning,” page 51.
To view switch zoning information:
1. On the Adapter & Switch Management menu, click Get Switch Zoning Information.
The Switch Zoning Information dialog box (
Figure 28 ) opens.
Figure 28 Switch Zoning Information dialog box
This dialog box shows the following current information about your switch:
• Zone List—Lists all zones and the members of each. The currently active zones are shown in a darker
color.
• Switch Name (Port #)—Shows the switch name and, in parentheses, the number of the switch port
that is attached to the HBA or RAID storage device.
• Port Type—Shows the type of port; for example, HBA or RAID storage.
• Vendor—Attached device manufacturer name; for example, Hewlett Packard.