HP 8.20q Fibre Channel Switch - Manual (Page 77)

HP SAN Connection Manager User Guide 77
10. In the Password to change the server’s HBA configuration dialog box ( Figure 44 ), enter the password,
and then click OK.
Figure 44 Password to change the server’s HBA configuration dialog box
NOTE: The same password applies for all the HBAs in the server. If more than one server is in the
list, you must enter the password for each server.
11. In the Update HBA BIOS wizard ( Figure 45 ), click Next.
Figure 45 Update HBA BIOS wizard
12. To complete the Update HBA BIOS wizard, choose one of the following options:
• To confirm and proceed with the BIOS update, click Finish.
• To change your selections for BIOS update, click Back.
• To stop BIOS update, click Cancel.
If you clicked Finish, a message box states the HBAs are ready to be updated. This process takes a
while and the system is temporarily unresponsive.
13. When prompted to update the HBAs, click Yes.