HP 8.20q Fibre Channel Switch - Manual (Page 135)

HP SAN Connection Manager User Guide 135
If you are configuring an EVA subsystem, the wizard prompts you to create logical disks for each disk
group ( Figure 110 ). If you are configuring an MSA subsystem, the wizard prompts you to create logical
disks for each storage pool ( Figure 111 ).
Figure 110 Storage Deployment wizard: create logical disks for EVA (custom deployment)
Figure 111 Storage Deployment wizard: create logical disks for MSA (custom deployment)
5. On the Create Your Logical Disks wizard window, create one or more logical disks—for the disk group
or storage pool name shown in either the Disk Group or Storage Pool box—as follows:
a. Under Prefix/Name, enter a logical disk name (up to 32 characters, including alphanumerics,
underscores, and hyphens; do not enter spaces or special characters).
b. Under Type, select a Vraid (for EVA) or RAID (for MSA) type from the list of applicable types for the
subsystem. (For an explanation of the Vraid types, see the ” Glossary ”.)
NOTE: On MSA 2000 family subsystems, you can create only one RAID type per storage pool.
c. Under Size (GB), enter the disk capacity in gigabytes.
d. Under Quantity, enter the number of LUNs allowed in this disk group or storage pool.
Group