HP 8.20q Fibre Channel Switch - Manual (Page 33)

HP SAN Connection Manager User Guide 33
If this is not the first time you have launched this software, or if your storage subsystem is HP EVA and
you chose No in step 2 , the Initialize an EVA Storage Subsystem dialog box ( Figure 11 ) opens.
If this is not the first time you have launched this software, or if your storage subsystem is HP MSA and
you chose No in step 2 , go to step 4 .
NOTE: If the software detects that another server is managing your EVA storage array, a message
box asks if you want to disable that server and take over management of the EVA from this server.
Click Yes to proceed.
Figure 11 Initialize an Enterprise Virtual Array (EVA) Storage Subsystem dialog box
3. Enter a name to identify this new storage subsystem array, and then click OK to initialize the subsystem
using the default configuration. (This step is not required for MSA storage.)
4. Wait while the application discovers (detects) switches, servers, storage subsystems, and logical disks.
This may take a few minutes.