HP 8.20q Fibre Channel Switch - Manual (Page 61)

HP SAN Connection Manager User Guide 61
Setting the switch symbolic name and domain ID
Use the Set Switch Symbolic Name and/or Domain ID dialog box to change the symbolic switch name or
the domain ID.
To change the switch symbolic name and domain ID:
1. To access the Set Switch Symbolic Name and/or Domain ID dialog box, choose one of the following
options:
• On the Adapter & Switch Management menu, click Set Switch Symbolic Name and/or Domain ID.
(If you have more than one switch in your SAN, the Switch Selection dialog box prompts you to
select a switch, and then click OK.)
• In the content pane’s Physical Connection map, right-click a switch icon to select that specific switch.
Then on the shortcut menu, click Set Switch Symbolic Name and/or Domain ID.
The Set Switch Symbolic Name and/or Domain ID dialog box ( Figure 37 ) opens and shows the current
symbolic name and domain ID.
Figure 37 Set Switch Name and/or Domain ID dialog box
2. If you want to change the symbolic name, enter a new name (maximum 32 characters) in the Symbolic
Name box.
3. If you want to change the domain ID, enter a new name in the Domain ID box.
4. To make the changes and close the dialog box, click OK. To close the dialog box without making any
changes, click Cancel.