Other hp websites, Customer self repair – HP 8.20q Fibre Channel Switch User Manual
Page 141
HP SAN Connection Manager User Guide 141
•
HP 8/20q and SN6000 Fibre Channel Switch Command Line Interface Quick Reference Guide
•
HP 8/20q and SN6000 Fibre Channel Switch Rack-Mount Kit Quick Start Installation Instructions
•
HP 81Q PCI-e Fibre Channel HBA Quick Start Installation Instructions
•
HP Small Form Factor Pluggable (SFP) Transceiver Installation Instructions
•
HP SN6000 Fibre Channel Switch XPAK Stacking Cable Quick Start Installation Instructions
•
HP SN6000 Fibre Channel Switch Power Supply Quick Start Installation Instructions
•
HP Read Me First
•
HP Fibre Channel Host Bus Adapters Read Me First
•
HP End User License Agreement (EULA)
•
HP Virtual Connect Enterprise Manager User Guide
For the latest product information, including firmware, documentation, and supported SAN configurations,
see one of the following HP web sites: for 8/20q Fibre Channel Switch,
or SN6000 Fibre Channel Switch,
.
Other HP websites
For additional information, see the following HP websites:
•
•
•
Customer self repair
HP products are designed with many Customer Self Repair parts to minimize repair time and allow for
greater flexibility in performing defective parts replacement. If during the diagnosis period HP (or HP
service providers or service partners) identifies that the repair can be accomplished by the use of a
Customer Self Repair part, HP will ship that part directly to you for replacement. There are two categories
of Customer Self Repair parts:
•
Mandatory—Parts for which Customer Self Repair is mandatory. If you request HP to replace these
parts, you will be charged for the travel and labor costs of this service.
•
Optional—Parts for which Customer Self Repair is optional. These parts are also designed for customer
self repair. If, however, you require that HP replace them for you, there may or may not be additional
charges, depending on the type of warranty service designated for your product.
NOTE:
Some HP parts are not designed for Customer Self Repair. In order to satisfy the customer warranty, HP
requires that an authorized service provider replace the part. These parts are identified as No in the
Illustrated Parts Catalog.
Based on availability and where geography permits, Customer Self Repair parts will be shipped for next
business day delivery. Same day or four-hour delivery may be offered at an additional charge where
geography permits. If assistance is required, you can call the HP Technical Support Center and a
technician will help you over the telephone. HP specifies in the materials shipped with a replacement
Customer Self Repair part whether a defective part must be returned to HP. In cases where it is required to
return the defective part to HP, you must ship the defective part back to HP within a defined period of time,
normally five (5) business days. The defective part must be returned with the associated documentation in
the provided shipping material. Failure to return the defective part may result in HP billing you for the
replacement. With a Customer Self Repair, HP will pay all shipping and part return costs and determine
the courier/carrier to be used.
For more information about the HP Customer Self Repair program, contact your local service provider. For
the North American program, visit the HP websit