HP 8.20q Fibre Channel Switch - Manual (Page 49)

HP SAN Connection Manager User Guide 49
Description of the network properties
The Network Properties ( Figure 27 ) include the following read-only information:
• IPv4 network settings: Enabled, Address, Subnet Mask, and Gateway
• IPv6 network settings: Enabled, Address, Gateway, and Assigned Addresses
• SNMP Enabled
• Broadcast Support Enabled
• DNS Enabled
• Configured Local Hostname (if any)
• Assigned Local Hostname (if any)
Figure 27 Network Properties
How to view network properties
To view network properties:
1. To access the switch properties, choose one of the following options:
• On the Adapter & Switch Management menu, click Get Network Properties. If there is only one
switch, the switch is automatically selected; continue with step 3 . If there is more than one switch,
the Switch Selection dialog box opens; continue with step 2 .
• On the content pane’s Physical Connection map, right-click the switch icon, and on the shortcut
menu, click Get Network Properties.
2. If the Switch Selection dialog box opens, select the switch you want to view.
3. When you finish viewing the network properties, click OK to close the dialog box.