HP 8.20q Fibre Channel Switch - Manual (Page 13)

HP SAN Connection Manager User Guide 13
5. Click Install.
The installation progress window appears briefly, and then the Available Storage Subsystem dialog box
( Figure 2 ) prompts you to select the type of HP storage subsystem for this station.
Figure 2 Installation wizard: Available Storage Subsystem
6. Select one or more types of storage subsystems (EVA and MSA) that exist in your SAN by choosing Yes
from the drop-down menu for the appropriate subsystem types. Then click OK to close this dialog box
and continue the installation.
The progress window monitors the installation. A progress bar shows the percent of the installation
completed and icons show the status of each component as it is installed, for example:
• A icon indicates successful installation of the component.
• A icon indicates that the component is not yet installed.
• A icon indicates that an error occurred during installation of this component. (The final wizard
window will provide additional information about component installation errors.)
When the first component, the HP FC driver, is installed, a diagnostic window shows the HBA
properties and targets found.