HP 8.20q Fibre Channel Switch - Manual (Page 37)

HP SAN Connection Manager User Guide 37
10. A message box asks if you want to set the switch zoning. Choose one of the following options:
• To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog
box ( Figure 17 ) opens. Go to step 9 .
• To set the switch zoning later, click No. (See “Setting the switch default zoning,” page 51.)
Figure 17 Set the Switch Default Zoning dialog box: new switch setup
The Set the Switch Default Zoning dialog box contains the following information:
• Default zone set name—Shows the default name for the current switch zoning configuration.
• Zone List—Shows the existing HBA zones with its HBA adapter and devices. If a zone list is closed
(the Switch Port #, Type, and Vendor information is hidden), click the plus mark (+) to open it.
• Switch Name (Port #)—Indicates the switch name and port number for each HBA and device.
• Type—Indicates the kind of device; for example, HBA or RAID storage.
• Vendor—Indicates the seller for the hardware indicated.