HP 8.20q Fibre Channel Switch - Manual (Page 123)

HP SAN Connection Manager User Guide 123
2. (Optional) Manage the controller by right-clicking a controller icon to open a shortcut menu. The
shortcut menu may contain the following items (not all menu items are available for every controller):
• Reset Controller (MSA storage only)—Reinitializes all controllers and invalidate their caches.
• Controller Details—Displays all of the selected controller (
Figure 93 ), including its name, status,
identifier, and health. It also lists its ports and active logical disks.
Figure 93 Controller Details dialog box
3. (Optional) Manage the disk drives by right-clicking a drive icon to open a shortcut menu. The shortcut
menu may contain the following items (not all menu items are available for every disk drive):
• Set Drive as Hot Spare (MSA storage only)—Designates the selected drive as a standby drive in
case another drive fails ( Figure 94 ).
• Remove Drive as Hot Spare (MSA storage only)—Returns the selected drive to the pool of drives
available for logical disk creation.
• Blink Drive (MSA storage only)—Begins blinking an LED indicator on the drive so that you can
identify it ( Figure 94 ).
• Stop Drive Blinking (MSA storage only)—Stops blinking the LED indicator that you have previously
set to blink.
• Set Drive Status (MSA storage only)—Opens the Set Drive Status dialog box ( Figure 95 ) to a status
(for example, available, offline, not ready, or failed).
• Drive Details—Opens the Drive Details dialog box ( Figure 96 ) and displays details of the selected
disk drive, including its name, status, identifier, health, bus, slot, and size. Additional details include
the storage pool name, RAID type, and a list of its logical disks.