HP 8.20q Fibre Channel Switch - Manual (Page 67)

HP SAN Connection Manager User Guide 67
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Editing an IPsec association
To edit an IPsec association:
1. On the Adapter & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Figure 39 on page 64) and lists the existing IPsec
Associations on the left and the existing IPsec Policies on the right.
2. Under IPsec Associations, select the association that you want to modify, and then click Edit.
The IPsec Association dialog box opens (
Figure 40 on page 65).
3. Modify the existing security association settings, and then click OK to save your changes. (For an
explanation on each of the fields on the IPsec Association dialog box, see “Creating an IPsec
association,” page 64.)
4. When you are through managing security associations, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Deleting an IPsec association
To delete an IPsec association:
1. On the Adapter & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Figure 39 on page 64) and lists the existing IPsec
Associations on the left and the existing IPsec Policies on the right.
2. Under IPsec Associations, select the association that you want to remove, and then click Delete.
3. When you are through managing security associations, click OK to save your changes and close the
IPsec Configuration dialog box. To close the IPsec Configuration dialog box without saving any
changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Copying and pasting IPsec associations
To simplify the process of creating IPsec associations, you can copy an existing association, paste it,
modify it as needed, and then save it under a new name. For example, if you use the same protocols and
keys for all IPsec associations, you can configure one complete association, and then copy it to create
additional associations with different source or destination addresses.