HP Officejet 6500 - Manual (Page 82)

that contains the number for the entry (for example, 26-50) in the Fax Speed-dial
List.
◦
To add a group, in the Fax Speed-dial List, click the New Group button, and
then select the individual entries from the selection. Enter the appropriate group
information and click Apply.
◦ To edit or remove an entry, in the Fax Speed-dial List, select the entry and click
either the Edit link or Delete icon.
◦ To delete a group: Select the entries and click the Delete button.
◦ Click Apply when you are finished.
• HP Device Manager (Mac OS X): Launch HP Device Manager, click Information
and Settings, and then select Fax Speed Dial Settings from the drop-down list.
• HP Solution Center (Windows): Open the Solution Center and follow the
instructions in the onscreen Help.
• Control Panel: Press the Setup button, select Speed Dial Setup, and then select
Print Speed Dial List.
Print a list of speed-dial entries
Embedded Web server (network connection): Open the embedded Web server, click
the Settings tab, and then click Fax Speed-dial in the left pane. Click the link that
contains the number for the entry (for example, 26-50) in the Fax Speed-dial List. Click
the Print button.
Fax over Internet Protocol (FoIP)
You may subscribe to a low cost phone service that allows you to send and receive faxes
with your device by using the Internet. This method is called Fax over Internet Protocol
(FoIP). You probably use a FoIP service (provided by your telephone company) if you:
•
Dial a special access code along with the fax number, or
• Have an IP converter box that connects to the Internet and provides analog phone
ports for the fax connection.
NOTE: You can only send and receive faxes by connecting a phone cord to the port
labeled "1-LINE" on the device. This means that your connection to the Internet must
be done either through a converter box (which supplies regular analog phone jacks
for fax connections) or your telephone company.
Some Internet faxing services do not work properly when the device is sending and
receiving faxes at high speed (33600bps). If you experience problems sending and
receiving faxes while using an Internet fax service, use a slower fax speed. You can do
this by changing the Fax Speed setting from High (the default) to Medium. For
information on changing this setting, see
Set the fax speed .
NOTE: If you have questions about internet faxing, contact your internet faxing
services support department or your local service provider for further assistance.
Chapter 6
78 Fax