Ink system failure – HP Officejet 6500 User Manual
Page 240
HP recommends you have a replacement available for when print quality becomes
no longer acceptable
Use the following to correct the error:
•
•
NOTE: Ink level alerts and indicators provide estimates for planning purposes only.
When you receive a low-ink alerts, consider having a replacement cartridge available
to avoid possible printing delays. You do not need to replace the ink cartridges until
print quality becomes unacceptable.
For information on recycling used ink supplies, see
.
The amount of ink in the following cartridge may be low enough to cause poor print
quality and cartridge changes may be required soon. HP recommends you have
replacement cartridges available to install when print quality is no longer
acceptable
Use the following to correct the error:
•
•
NOTE: Ink level alerts and indicators provide estimates for planning purposes only.
When you receive a low-ink alerts, consider having a replacement cartridge available
to avoid possible printing delays. You do not need to replace the ink cartridges until
print quality becomes unacceptable.
For information on recycling used ink supplies, see
.
Ink system failure
Use the following to correct the error:
Turn off the product, unplug the power cord, and wait 10 seconds. Then, plug the power
cord back in and turn on the product.
If you continue to receive this message, write down the error code provided in the
message on the product display, and then contact HP support. Go to
.
If prompted, choose your country/region, and then click Contact HP for information on
calling for technical support.
Cause: The printhead or the ink delivery system failed and the product can no longer
print.
Chapter 9
236
Maintain and troubleshoot