HP Officejet 6500 - Manual (Page 68)

3. Press the right arrow button to select On, On Error Only, or Off.
4. Press OK.
Reprint received faxes from memory
If you set the Backup Fax Reception mode to On, the received faxes are stored in
memory, whether the device has an error condition or not.
NOTE: After the memory becomes full, the oldest, printed faxes are overwritten as
new faxes are received. If all the stored faxes are unprinted, the device does not
receive any fax calls until you print or delete the faxes from memory. You might also
want to delete the faxes in memory for security or privacy purposes.
Depending on the sizes of the faxes in memory, you can reprint up to eight of the most
recently printed faxes, if they are still in memory. For example, you might need to reprint
your faxes if you lost the copy of your last printout.
To reprint faxes in memory from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Press Setup.
3. Select Tools, and then select Reprint Faxes in Memory.
The faxes are printed in the reverse order from which they were received with the
most recently received fax printed first, and so on.
4. If you want to stop reprinting the faxes in memory, press Cancel.
To delete all the faxes in memory from the device control panel
▲ Turn off the device by pressing the Power button.
All faxes stored in memory are deleted from memory when you turn off the power.
Poll to receive a fax
Polling allows the device to ask another fax machine to send a fax that it has in its queue.
When you use the Poll to Receive feature, the device calls the designated fax machine
and requests the fax from it. The designated fax machine must be set for polling and have
a fax ready to send.
NOTE: The device does not support polling pass codes. Polling pass codes are a
security feature that require the receiving fax machine to provide a pass code to the
device it is polling in order to receive the fax. Make sure the device you are polling
does not have a pass code set up (or has not changed the default pass code) or the
device will not be able to receive the fax.
To set up poll to receive a fax from the device control panel
1. In the Fax area, press Fax repeatedly until How to Fax appears.
2. Press until Poll to Receive appears, and then press OK.
Chapter 6
64 Fax