HP Officejet 6500 - Manual (Page 45)

Change settings (Mac OS X)
To change the settings
1. On the File menu, click Page Setup.
2. Change the settings that you want (such as paper size), and then click OK.
3. On the File menu, click Print to open the print driver.
4. Change the settings that you want (such as media type), and then click OK or
Print.
Print on both sides (duplexing)
You can print on both sides of a sheet of media either manually, or automatically using
the duplexer.
NOTE: The printer driver does not support manual duplexing. Two-sided printing
requires an HP Automatic Two-sided Printing Accessory to be installed on the device.
This section contains the following topics:
• Guidelines for printing on both sides of a page
• Perform duplexing
Guidelines for printing on both sides of a page
• Always use media that conforms to the device specifications. For more information,
see
Understand specifications for supported media .
• Specify two-sided printing options in your application or in the printer driver.
• Do not print on both sides of transparencies, envelopes, photo paper, glossy media,
or paper lighter than 16 lb bond (60 g/m
2 ) or heavier than 28 lb bond (105 g/m 2 ). Jams
might occur with these media types.
• Several kinds of media require a specific orientation when you print on both sides of
a page, such as letterhead, preprinted paper, and paper with watermarks and
prepunched holes. When you print from a computer running Windows, the device
prints the first side of the media first. Load the media with the print side facing down.
• For auto-duplexing, when printing finishes on one side of the media, the device holds
the media and pauses while the ink dries. Once the ink dries, the media is pulled back
into the device and the second side is printed. When printing is complete, the media
is dropped onto the output tray. Do not grab it before printing is complete.
• You can print on both sides of supported custom-sized media by turning the media
over and feeding it into the device again. For more information, see
Understand
specifications for supported media .
Perform duplexing
NOTE: You can perform manual duplexing by first printing only the odd pages,
flipping the pages over, and then printing only the even pages.
Print on both sides (duplexing) 41