beautypg.com

HP Officejet 6500 User Manual

Page 138

background image

groups or when usage is low. The connected computer is slowed down when many users
print to the device.
Basic requirements for sharing in Mac OS X environment include the following items:

The Macintosh computers must be communicating on the network using TCP/IP, and
they must have IP addresses. (AppleTalk is not supported.)

The device that is being shared must be connected to a built-in USB port on the host
Macintosh computer.

Both the host Macintosh computer and the client Macintosh computers that are using
the shared device must have the driver or PPD for the device that is installed. (You
can run the installation program to install the device sharing software and associated
Help files.)

For more information about USB device sharing, see the support information on the Apple
Web site (

www.apple.com

) or the Apple Macintosh Help on the computer.

NOTE: Printer Sharing is supported in Mac OS X (v10.4 and higher).

NOTE: Printer Sharing must be enabled on the host and client computers. Open
System Preferences, select Sharing, and then click Printer Sharing.

To share the device among computers running Mac OS X
1.
Turn on printer sharing on all Macintosh computers (host and clients) that are

connected to the printer.
Open System Preferences, click Print & Fax, select the printer you want to share
from the list on the left, and then check Share this printer.

2. To print from the other Macintosh computers (the clients) on the network, do the

following:
a. Click File, and then select Page Setup in the document you want to print.
b. In the drop-down menu next to Format for, select Shared Printers, and then

select your device.

c. Select the Paper Size, and then click OK.
d. In the document, click File, and then select Print.
e. From the drop-down menu next to Printer, select Shared Printers, and then

select your device.

f. Make additional settings, if necessary, and then click Print.

Set up the device for wireless communication (some
models only)

You may set up the device for wireless communication using one of the following ways:

Setup method

Infrastructure
wireless
communication

Ad hoc wireless
communication
*

USB cable (recommended)
For more information, see

To set up wireless

communication using the installer (Mac OS X)

or

To

Chapter 8

134

Configure and manage