NORD Drivesystems BU0750 - Manual (Page 74)

NORDAC SK 750E Manual
74 Subject to technical amendments BU 0750 GB-3311
5 NORD CON software
5.1 General Information
NORD CON is a PC programPC-Program to control and
parameterise frequency inverters manufactured by Getriebebau
NORD. The software can be installed on all computers with the
Windows 95, 98, NT, 2000, ME or XP operating systems.
There are two ways to install the NORD CON software. The
NORD CON software can either be installed from the NORD
PAC CD (Part. No.: 206099985) or downloaded from the website
>www.nord.com<.
With NORD CON, communication can be carried out with up to
31 frequency inverters simultaneously or via the RS485 interface
specific to the device.
The connection from PC to SK 300E is implemented via the
interface converter SK IC1-232/485 (Part. No. 276970020) and
the connection cable 300E (Part. No. 278910060).
As well as control and parameterisation of the frequency
inverter, operating values can also be displayed. The integrated
oscilloscope function is a helpful tool for optimising drive
systems. The resulting oscillograms
– like the parameter data
sets - can be saved, edited and archived.
NOTE: Internet site for downloading the PC software NORD
CON
>>> www.nord.com <<<
Features

Creation, documentation and storage of frequency inverter parameter settings

Control of the connected frequency inverters

Monitoring of connected frequency inverters

Oscilloscope function

Creation of macros for test process sequences

Remote control of connected frequency inverters
Remote control
For commissioning (parameterisation), the known device displays are
simulated, enabling remote control of the frequency inverter in a familiar
environment.
All possible frequency inverter operating unit functions can be carried out.
Simulation ControlBox