NORD Drivesystems BU0750 - Manual (Page 126)

NORDAC SK 750E Manual
126 Subject to technical amendments BU 0750 GB-3311
7.10 Parameter overview, User settings
(P)

Parameter set-dependent, these parameters can be differently adjusted in 4 parameter sets.
Parameter
No.
Name
Factory
setting
Setting after commissioning
P 1 P 2 P 3 P 4
OPERATING DISPLAYS (7.2)
P000 Operating display
P001 Selection display 0
P002 Factor display 1.00
BASIC PARAMETERS (7.3)
P100 Parameter set 0
P101 Copy parameter set 0
P102 (P) Start-up time [s] 2.0 or 3.0
P103 (P) Braking time [s] 2.0 or 3.0
P104 (P) Minimum frequency [Hz] 0.0
P105 (P) Maximum frequency [Hz] 50.0
P106 (P) Ramp rounding [%] 0
P107 (P) Brake reaction time [s] 0.00
P108 (P) Disconnection mode 1
P109 (P) DC brake current [%] 100
P110 (P) DC braking time on 2.0
P111 (P) P factor torque limit [%] 100
P112 (P) Torque current limit [%] 401 (OFF)
P113 (P) Jog frequency [Hz] 0.0
P114 (P) Brake reaction time [s] 0.00
MOTOR DATA / CHARACTERISTIC CURVE PARAMETERS (7.4)
P200 (P) Motor list 0
P201 (P) Nominal motor frequency [Hz] 50.0 *
P202 (P) Nominal speed [rpm] 1460 *
P203 (P) Nominal motor current [A] 21.5 *
P204 (P) Nominal motor voltage [V] 400 *
P205 (P) Nominal power [kW] 11.00 *
P206 (P) Motor cos phi 0.84 *
P207 (P) Motor circuit [star=0/delta=1] 1 *
P208 (P) Stator resistance [

] 1.08*
P209 (P) No load current [A] 11.6 *
P210 (P) Static boost [%] 100
P211 (P) Dynamic boost [%] 100
P212 (P) Slip compensation [%] 100
P213 (P) Amplification ISD control [%] 100
P214 (P) Torque precontrol [%] 0
P215 (P) Boost precontrol [%] 0
P216 (P) Boost time precontrol [s] 0.0
*) dependent on inverter power or P200