NORD Drivesystems BU0750 - Manual (Page 16)

NORDAC SK 750E Manual
16 Subject to technical amendments BU 0750 GB-3311
2.4 Attachment accessories for the SK 750E
1. Wall mounting, SK WMK-750E Size 1 or. ...Size 2: For the close-to-motor version of the SK 750E
frequency inverter, attachment to a suitable mounting surface is by means of an optional mounting bracket.
2. Motor mounting: Alternatively, there is the possibility of direct mounting on NORD DS standard motors
(motor-integrated version). Additional mounting material is required for this.
2.5 SK 750E wall mounting kit
For use of the SK 750E frequency inverter close to the motor, the wall mounting kit enables the geared motor
and the frequency inverter to be installed separately. For wall mounting of the SK750E, 2 suitable brackets are
required, which can be ordered as accessories. These are screwed to the rear of the SK 750E with the
fastening material provided. Both of the wall mounting kits comply with protection classes IP54 or IP65. The
same wall mounting kit is required for Size 1 air cooled and water cooled versions. For Size 2, there are
differences in the wall mounting kits for the two versions.
Type for device Part number
SK WMK-750E-Size 1
SK 750E-551-323-A (-W) ... SK 750E-751-323-A (-W)
SK 750E-551-340-A (-W) ... SK 750E-152-340-A (-W)
275219000
SK WMK-750E-Size 2
SK 750E-921-323-A ... SK 750E-112-323-A
SK 750E-182-340-A ... SK 750E-222-340-A
275219010
SK WMK-750E-Size 2-W
(in preparation) SK 750E-921-323-A -W... SK 750E-112-323-A-W
SK 750E-182-340-A -W... SK 750E-222-340-A-W 275219020
(in preparation)
SK WMK-750E-Size 1 SK WMK-750E-Size 2
Components of the wall mounting kits:
Wall mounting kit:
SK WMK-750E-Size 1