NORD Drivesystems BU0750 - Manual (Page 18)

NORDAC SK 750E Manual
18 Subject to technical amendments BU 0750 GB-3311
2.6 Mounting of the SK750E directly on a motor
For motor-mounted (motor-integrated) use of the SK 750E frequency inverter direct installation of the geared
motor and the frequency inverter is possible using the attachment frame and the additional "motor mounting
feet". Three different attachment frames are available for mounting on the various sizes of motor (132, 160,
180MX/LX).
Attachment frame for device Part number
Attachment frame 750E-Size 1-IEC132
SK 750E-551-323-A ... SK 750E-751-323-A
SK 750E-551-340-A ... SK 750E-751-340-A
275218000
Attachment frame 750E-Size 1-IEC160* SK 750E-112-340-A ... SK 750E-152-340-A 275217000
Attachment frame 750E-Size 2-IEC160*
SK 750E-921-323-A ... SK 750E-112-323-A
SK 750E-182-340-A ... SK 750E-222-340-A
275216000
*Also suitable for motor size IEC132
Attachment frame 750E-Size 1-IEC132
Attachment frame 750E-Size 1-IEC160
Attachment frame 750E-Size 2-IEC160
The number and version of the attachment feet to be used depends on the type of motor and can be obtained
from the following table.
Part number Motor size Number per drive unit
16630900 132 2
17481000 ("Foot")
160, 180MX, 180LX (Siemens)
2
17181010 (Screw set) 4
17430900 160 L, 160 LH, 160 MH, 180MX, 180LX (NORD) 2
17130900 160M (NORD) 2
Example: "Attachment feet" for size 132 motor, Part No. 16630900: