NORD Drivesystems BU0750 - Manual (Page 124)

NORDAC SK 750E Manual
124 Subject to technical amendments BU 0750 GB-3311
Parameter Setting value / Description / Note
Parameter
set
Available with option
P744 Configuration Always visible
0 ... 9999 The option modules recognised by the frequency inverter are displayed in this parameter.
The display with the ParameterBox is in plain text.
The possible combinations are displayed in code in the ControlBox. The Customer Units in use
are displayed on the right. If another Encoder module is installed, this is indicated in the second
digit with a 1, the option PosiCon is indicated with a 2.
No I/O XX00
Basic I/O XX01
Standard I/O XX02
Multi I/O XX03
USS I/O XX04
CAN I/O XX05
Profibus I/O XX06
Encoder 01XX
PosiCon 02XX
P745 ... - 01
... - 02
... - 03
Module version Always visible
0 ... 32767
Software version of the integrated
modules (only when own
processor is present).
Array level: [01] Technology unit
[02] Customer Unit
[03] Special Extension Unit
P746 ... - 01
... - 02
... - 03
Module status Always visible
0000 ... FFFF hex
Status of the installed modules
(if active)
Array level: [01] Technology unit
[02] Customer Unit
[03] Special Extension Unit
P747 Inverter voltage range Always visible
1 / 2 Indicates the mains voltage range for which this device is specified.
1 = 200 … 240V 2 = 380 … 480V
P750 Overcurrent statistic Always visible
0 ... 9999 Number of overcurrent messages during the operating period.
P751 Overvoltage statistic Always visible
0 ... 9999 Number of overvoltage messages during the operating period.