NORD Drivesystems BU0750 - Manual (Page 70)

NORDAC SK 750E Manual
70 Subject to technical amendments BU 0750 GB-3311
4.6 ParameterBox error messages
Display Fault
Cause

Remedy
Communication error
200 Illegal parameter number
These error messages are due to EMC interference or
differing software versions of the participants.

Check the software version of the ParameterBox and
that of the connected frequency inverter.

Check the cabling of all components, regarding
possible EMC interference
201
Parameter value cannot be
changed
202
Parameter outside of value
range
203
Incorrect
Sub-index
204 No Array parameter
205 Incorrect parameter type
206
Incorrect response
identifier
USS interface
207
Checksum error of USS
interface
Communication between frequency inverter and ParameterBox is
faulty (EMC), safe operation cannot be guaranteed.

Check the connection to the frequency inverter. Use a
shielded cable between the devices. Route the BUS
leads separately from the motor cables.
208
Incorrect status identifier,
USS interface
Communication between frequency inverter and ParameterBox is
faulty (EMC), safe operation cannot be guaranteed.

Check the connection to the frequency inverter. Use a
shielded cable between the devices. Route the BUS
leads separately from the motor cables.
209_1 Inverter not responding
The ParameterBox is waiting for a response from the connected
frequency inverter. The waiting time has elapsed without a response
being received.

Check the connection to the frequency inverter. The
settings of the USS parameters for the frequency
inverter were changed during operation.
Identification errors
220 Unknown device
Device ID not found.
The connected inverter is not listed in the database of the
ParameterBox; no communication can be established.

Please contact your Getriebebau Nord Representative.
221
Software version not
recognised
Software version not found!
The software of the connected frequency inverter is not listed in the
ParameterBox database, no communication can be set up.

Please contact your Getriebebau Nord Representative.