NORD Drivesystems BU0750 - Manual (Page 13)

2 Assembly and installation
BU 0750 GB-3311 Subject to technical amendments 13
2 Assembly and installation
2.1 Motor-integrated and close to motor layouts
With the motor-integrated version the SK 750E frequency inverter is directly mounted on the motor by means
of an attachment frame and "mounting feet", which integrate it into the drive unit.
Motor-integrated version: Fig.: SK 750E in IP54 version (air cooling)
Optional technology unit
SK TU2-CTR
SK TU2-POT Optional technology unit
Bus modules
Optional customer unit
SK CU1-... Optional special extension
SK XU1-...
With the SK 750E close-to-motor version, the frequency inverter can be mounted close to the motor, i.e. on a
wall or a machine frame for example. A wall-mounting kit is required for this (see Section 2.5).
Close-to-motor version:
Optional technology unit
SK TU2-CTR
SK TU2-POT Optional technology unit
Bus modules
Optional customer unit
SK CU1-... Optional special extension
SK XU1-...
Fig.: SK 750E in IP54 version (air cooling)