GW Instek GLC-9000 User Manual - Manual (Page 99)

SYSTEM SETTINGS
99
Interface
Background The Interface menu is used to select the remote
control interface and interface settings. After a
connection has been established, an interface icon
will be shown in the LCD display.
Panel Operation 1. To access the Interface menu,
press the Interface key from
the System setup menu.
Interface
RS232, USB and GPIB can be selected from the
interface menu. Each interface has a set a number of
parameters and includes interface information.
RS232 1. To set the interface to RS232,
press RS-232.
RS-232
2. Click the arrow and select a
baud rate from the drop
down list.
Range 4800~115200 baud, 8 bit data, no
parity check, 1 stop bit.