GW Instek GLC-9000 User Manual - Manual (Page 20)

GLC-9000 User Manual
20
Measurement
Range Automatic/Manual ranges:
DC/AC/AC+DC：50uA/500uA/5mA/25mA
(Range：4uA～25mA)
AC Peak：500uA/1mA/10mA/75mA
(Range：40uA～75mA)
Operation  Auto/Manual/Programmable
Single fault conditions and power supply
polarity switch
 Measurement/Delay time settings
 Maximum / minimum hold
 PASS/FAIL(Upper, Lower) Judgement (limits)
 save and recall setup and measurement results
 System clock settings
 Multilanguage support
 System Self test
 EUT voltage/current/power consumption
 High output alarm and led indicators.
 Remote control interface options
Interface With the exception of the Start, Reset and power
switches, the user-interface is entirely controlled
via a touch screen.
LCD The simple, user-friendly interface is extremely
intuitive with a large 5.6” color TFT screen.
EUT Test Status The voltage, current and power consumption of
the EUT can be measured.
Built-in Voltage
Meter The built in voltage meter detects 0-300V. The
voltage meter is activated when the Safety Extra
Low Voltage (SELV) function is on.