GW Instek GLC-9000 User Manual - Manual (Page 30)

GLC-9000 User Manual
30
Measurement Flow Chart
Start
Connect the
test leads
Are you
performing an earth
leakage current
test?
Connect the EUT
Turn on the EUT power Supply
Measurement Settings
Select leakage current type
Select Range
Press START to start measurement
Do you
need to save
Measurement
data?
Do you
need to save
measurement
Settings?
Check the fuse and power
Power up
Select a class type
Select a measurement Network
Select the Upper and Lower Limits
Select the measurement mode
Turn off the instrument power
Remove the test leads
End
Turn off the EUT power supply
Press the SAVE
button
Press the SAVE
button
Reference Page
Getting Started 38
Getting Started 41
Selecting the Safety Class 63
Selecting a Meas. Network 64
Selecting Meas. Parameters 68
Selecting a measuring mode 65
Measurement 59
Operation 43
Measurement 59
Measurement Parameters 68
Measurement 59
Measurement Parameters 68
Saving Meas. Results 75
Saving Meas. Settings 75