GW Instek GLC-9000 User Manual - Manual (Page 68)

GLC-9000 User Manual
68
Selecting Measurement Parameters
Before measurement parameters can be set, the network model,
grounding class and measurement mode need to be configured.
Setting the Limits
Operation 1. To set the Upper and lower
limits, press the Limit key to
enter the Current limit setup. Limit
2. To choose a limit, press on
the Upper or Lower key.
Upper
3. Toggle the corresponding
ON/OFF key to on.
OFF ON
4. Enter a limit using the keypad.
3.145mA 3 . mA 5 4 1
Range 4.000uA ~ 25.00mA