GW Instek GLC-9000 User Manual User Manual
Page 116
GLC-9000 User Manual
116
SCPI Command
Terminators
To terminate a message, either a line feed character
the EOI line. When a message terminator is sent to
the instrument, the SCPI command level is
returned to the root level.
IEEE-488.2 Basic
Commands
IEEE-488.2 standard defines a set of basic
commands to restore default settings, clear event
and status registers, set event registers and
determine the current operation status. All basic
commands are three character commands headed
with an asterisk (*). The command key words and
the first parameter are separated by a space. A
semi colon (;) is used to separate multiple
commands, as illustrated below: "*RST; *CLS; *ESE
32; *OPC?"
SCPI Parameter
Types
The SCPI language defines a number of different
data formats to send and receive information.
Value parameters: Commands using value
parameters support a number of different decimal
notations, including scientific, decimal point and
signed notation. Additionally, value parameters
can also include units directly after some
numerical parameters, i.e., s or ms. If a specific
value is required, values will be automatically
rounded to suit. The command below uses value
parameters:
CONFigure:COMParator [