GW Instek GLC-9000 User Manual - Manual (Page 164)

GLC-9000 User Manual
164
Execution Errors
-221 Setting conflict
Indicates that a legal command was received, but
cannot be executed in the current machine state.
-222 Data out of range
Indicates that the parameter is out of range. For
example: CONFigure:MTIMe 2000
Device Specific Errors
-350 Queue Overflow
The Queue Overflow error occurs when the
number of error messages is greater than 20 (error
queue is full). When the error queue is full, the
error queue will be cleared and the Queue
Overflow message will be generated. The Queue
overflow error can be cleared by using the *CLS
command or resetting the instrument. Note: Using
the *RST command will not clear the Queue
overflow error message.