GW Instek GLC-9000 User Manual - Manual (Page 38)

GLC-9000 User Manual
38
Warning
EUT Power Input
wiring.
Note the position of the live
and neutral line inputs for the
EUT line in and the EUT AC
power block. Failing to connect
the EUT input properly will
affect the measurement
accuracy.
As the AC power block is
designed for multiple regions,
the EUT AC power block has
user-defined live and neutral
inputs. To configure the L & N
input to your region, see page
108.
L N
EUT Line In
EUT AC Power Block
N L
Power and Probe Connection
Mains Power 1. Ensure the power is switched off from the front
panel.
2. Insert the AC mains power into the power
socket on the right-hand side of the rear panel.
The arrow above shows the location of the AC main
power socket.
EUT Power 1. Ensure the power switch is off on the front
panel.