GW Instek GLC-9000 User Manual - Manual (Page 53)

OPERATION
53
3. Press the reset button to
stop measurement.
 GLC-9000
Warning Turn the circuit breaker off before removing the EUT.
Ensure the power consumption of the EUT doesn’t
exceed the rated power limits.
Patient Leakage Current I
Network Medical network, (MD-F) for the applied part.
Applicable for internal power supply and Class I
and Class II types.
Connection As illustrated, ensure that the power source and
test leads are properly connected.
Internal Power
Supply 1. Connect the test leads to the T1 and T2
terminals.
2. Position the T1 test lead to an ungrounded
section of the enclosure.
3. Position the T2 test lead to the applied part of
the EUT.
Internal power supply