Yokogawa Standalone MW100 - Manual (Page 72)

2-22
IM MW100-17E
Output of Time Synchronization Logs (FL0, SNTP)
• Output using the FL command.
• SNTP client logs are output. Up to 50 past logs are retained. If that number is
exceeded, old logs are overwritten with new ones.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_kkkkkkkkkk_mmm...mCRLF
.........................................
ENCRLF
yy Year (00 to 99)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Seconds (00 to 59)
kkk...k Description
error : Error
report : Report of the execution results (no errors)
mmm...m Error message (only upon error occurrence) or ADJUST (if no error)
_ Blank
Example
EA
99/05/11 12:20:30 error EBROKEN
99/05/11 12:30:00 report
EN
Time Synchronization Client Error Messages
Error Code Description Corrective Action
EDORMANT Internal processing error Servicing required.
ENOTACTIVE Internal processing error Servicing required.
EACTIVE Internal processing error Servicing required.
ELINK Ethernet not powered Check cable connections and power of
HUB
EHOSTNAME SNTP server name not correct Check whether destination server name
is set correctly.
ETCPIP Internal processing error Servicing required.
EINVAL Internal processing error Servicing required.
ESEND Queries the time on the server Check the IP address of the MW100.
failed
ETIMEOUT Failed to receive response from Check whether destination SNTP
server server is running.
EBROKEN Received time information Check whether destination SNTP
corrupted server is functioning correctly
2.2 ASCII Output